Mont Stubline - Stainless Steel Tanks

DEDICATED CUSTOMER TEAM AND AGILE SERVICES

Mont Stubline manufactures stainless steel and carbon steel tanks (1–200 m³) and PED pressure vessels up to 100 bar, with certified WPS/WPQR procedures, NDT testing and full technical documentation. For quick technical consultation and a tailored offer, our team is at your disposal.

SEND INQUIRY

STAINLESS STEEL TANKS

We manufacture stainless steel tanks with capacities from 1 to 200 m³ for the food, pharmaceutical, chemical and energy industries. Each tank is designed according to the process specification: vertical or horizontal, self-supporting or on legs/frame, with options for insulation, heating/cooling jacket, agitator and CIP connections. Typical materials are AISI 304 / AISI 316L (other grades available on request), with surface finish 2B, brushed or polished according to hygiene requirements.

All tanks are supplied with complete technical documentation (material certificates EN 10204 3.1, welding log, test reports). NDT inspections (VT/PT) and hydrostatic pressure tests are performed in line with the applicable standards and customer specifications.

Stainless steel tank manufacturing Mont Stubline

TECHNICAL SPECIFICATIONS

Parameter	Specification
Capacity	1–200 m³
Material	AISI 304 / AISI 316L
Construction	Cylindrical shell; bottom: conical or flat; top: elliptical or conical.
Connections	Flanged; TC (tri-clamp); DN on request, according to process requirements.
Jacket	Heating/cooling jacket (spiral or channel type) for water, steam or glycol.
Insulation	Mineral wool / PU foam; external stainless steel cladding.
Mixing	Anchor or propeller agitators; low-speed or high-speed; with frequency converter if required.
Surface finish	2B; brushed (#180–#320); polished.
Testing	VT/PT; hydrostatic pressure testing.
Documentation	EN 10204 3.1 material certificates; welding log; FAT report.
Typical applications	Storage of raw materials and finished products Homogenisation and hygienisation Preparation of solutions and process media Thermal stabilisation (with heating/cooling jacket) Integration into CIP/SIP systems

FREQUENTLY ASKED QUESTIONS – STAINLESS STEEL TANKS

What capacities and dimensions do you supply?

The standard range is 1–200 m³. Diameter, height, vertical or horizontal orientation and support type (legs/frame) are defined according to the available space and process requirements. Special dimensions can also be engineered on request.

AISI 304 or AISI 316L – which should I choose?

AISI 304 is a very good choice for most food-grade and general-purpose media. AISI 316L contains molybdenum and is recommended for more aggressive environments (chlorides, certain acids, pharmaceutical applications). The final selection depends on pH, temperature and the exact process medium.

Do you provide insulation and a heating/cooling jacket?

Yes. We supply thermal insulation (mineral wool or PU foam) with stainless steel cladding, and heating/cooling jackets in spiral or channel design. Jackets are designed for water, steam or glycol, and dimensioned according to the required operating conditions and heat exchange duty.